j'ai passer ma flysky i6 en 10voies ca ajoutes :
Firmware V1.5 courtesy of D.Borthwick 21/01/2016 Updater by Benbojangles Packaged by Povlhp
Folder includes: - .exe updater containing borthwick 10ch firmware - 10ch .hex file
The mods are: 4 extra Aux channels - any of them can be set to be any switch or VR. New Aux channels are stored against each model. Updated screen for setting the aux channels. Updated screen for displaying all 10 channels. Inactivity timer 10min instead of 1min.
Enables you to select all 10 channels in the iBus setup menu.
ch 9 & 10 bug fix
tried with a FS-IA10 receiver and get 10 channels of servos
combinations of switches to work for Aux 5 to 10. So now as well as selecting "None", "Vr A" or"Vr B" and"Sw A" to "Sw D", you can also select "Sw A+B", "Sw B+C", "Sw C+D" or "Sw A+D". Gives you lots of choice for multiposition flight modes or other things.
Bug fix: fix for the mix crash problem
also contains the external battery sensor code I had been working on. The revised RX Battery page lets you set:
The sensor - Internal (default) or External (uses first iBus voltage sensor CVT01) The cells type - NiMH (default) or LiPo The cell count - (defaults to 4) The Low level - Bottom level of battery symbol & causes the fast beep alarm The Alarm Level - Causes the slow beep alarm The High Level - Top level of battery symbol
OK moves between items. Up and Down modify an item. Cancel exits without change. Long Cancel exits with save. Long OK sets default values (based on cell type and count).
Bug fix for Elevons (21/01/2016)
Ce que ca interresse je peux vous les faires y en a pour 5min.
|